鉄筋フック
Locations
* Click to view the location page
鉄筋フック
Fall prevention hardware for attaching lifeline ropes from columns and beam reinforcement.
Can be securely installed at any desired height!
Features
-
■ Dimensional drawing: Type 32 -
■ Dimensional drawing: Type 42
- Can be installed even within the pitch of hoop reinforcement or stirrups. Easy to install and remove freely, making height adjustments simple.
- Equipped with a disk spring at the tip. Provides secure and stable tightening against reinforcing bars for peace of mind.
Precautions for Use
・Please tighten bolts to a torque of 35 N·m to 45 N·m.
・When attaching hardware to column bars (main reinforcement) or beam bars, if hoops or stirrups have not yet been installed, using lifeline equipment will not provide sufficient effectiveness.
・Additionally, do not use if the mounting surface lacks sufficient structural strength, as adequate effectiveness cannot be expected.
Specifications
鉄筋フック
| Model | 32型 | 41型 |
|---|---|---|
| Suitable Reinforcing Bar Diameter (mm) | D22–32 | D35–41 |
| Mass (g) | 630 | 920 |
Related Equipment
メトロポスト
It is easy to install and remove through the holes in the decking, and the support posts can be securely fastened with a single touch. The handrail protrudes very little, making it safe.
Truck Stanchion with Stairs
To ensure safety during loading and unloading operations on truck beds.
Lifelines can be installed at 3 different heights. Optional extension pipes allow for height adjustment and setup across 6 different levels.
