Floor-mounted fabric frame with ladder
Handling Locations
*Click to go to Locations page
Floor-mounted fabric frame with ladder
For climbing up and down in narrow spaces where outside stairs cannot be installed.
The wide opening allows for smooth lifting.
- Certification
- NETIS Registered Products
Features
-
open state -
■Usage example ①
Ladder gable side installation -
■Usage example ②
Ladder girder side installation
- The ladder can be installed in 4 directions. You can use it according to the situation.
- Compact as the ladder is stored inside the fabric frame. Can also be stacked.
■Installation conditions
Installable height = 1,601 to 1,955mm Compatible pipe diameter Φ42.7・Φ48.6
(Can be installed)
・Inch and meter size of frame scaffolding
・Type A (height 1,800mm) and type B (height 1,900mm) of wedge-tied scaffolding (one side scaffolding)
・YT Lock
(Cannot be installed)
・Wedge tie-down type scaffolding (one side scaffolding) C type (Sankyo type)
・If the height of the first stage exceeds 1,955 mm due to adjustment of the jack base, etc. (only the first stage is not possible)
・Scaffolding with a building frame height of less than 1,601 mm, such as Rolling Tower
Specification
Fabric frame with floor and ladder
Model | STJR-F1850A | STJR-M1850A |
---|---|---|
frame size | For inches | for meter |
Installation height mm | 1,601~1,955 | 1,601~1,955 |
Adjustment pitch mm | 25 | 25 |
Length (grip metal core - core) mm | 1,829 | 1,800 |
Width mm | 500 | 500 |
Mass (kg) | 17.8 (cloth frame 14.6 / ladder 3.2) | 17.7 (cloth frame 14.5 / ladder 3.2) |
Max load kN(kgf) | Cloth frame 1.96(200) Ladder 0.98(100) | Cloth frame 1.96(200) Ladder 0.98(100) |