Kons-arch
Handling Locations
*Click to go to Locations page
Kons-arch
A folding mobile scaffold ideal for renovation work across obstacles
・When carrying out renovation work, it is possible to set up scaffolding with existing desks and other fixtures still in place.
- Unit structure reduces assembly and storage time
・Handrails, four-way sensors, and special ladders are standard equipment
- Certification
- Machine number management product
Features
-
Straddle dimensions under the work floor -
The work space can be expanded by connecting the girder side. -
Fewer components and lighter than similar equipment
Materials can be loaded onto the main body and transported all at once
- The working floor height can be adjusted in 5 steps at 60mm intervals.
- The height of the handrail can be adjusted to two levels: 600mm and 850mm.
Example of use
-
Ample space under the work floor
Specification
Consarch TAN-16
| Working floor dimensions width mm | 780 |
|---|---|
| Working floor dimensions Length mm | 2,100 |
| Working floor height mm | 1,300～1,600 |
| Adjustable range (mm) | 60 |
| Mounting dimensions width (mm) | 814 |
| Mounting dimensions length (mm) | 2,490 |
| Storage dimensions width (mm) | 814 |
| Storage dimensions length (mm) | 528 |
| Storage dimensions height (mm) | 1,315 |
| Mass (kg) | 63.2 |
| Max load kN(kgf) | 1.47(150) |
The above figures are for the main unit only.
safety guard
| Height mm (mounting height) | 600・850 |
|---|---|
| Mass (kg) | 1.6 |
Ladder
| Width mm | 423 |
|---|---|
| Length mm | 1033.5 |
| Mass (kg) | 4.3 |
Option
-
outrigger
Prevents the main unit from falling over.
●Dimensions = Length (mm): 948 to 1,659
Weight (kg): 1.9
Related Equipment
Rakuda Series
Since the handhold bar is sliding, it can be used at sites where installation space is limited.
Yuma Series
In addition to the regular standing horse size, there is also a size with a shorter top plate. It can also be used when there is limited installation space on-site.
Renovation Scaffolding
During renovation work, it is possible to erect scaffolding while leaving the existing desks etc. in place.
