Dust Collector
Handling Locations
*Click to go to Locations page
Dust Collector
Groundbreaking high performance with single-phase 100V power supply. Contributes to preserving the working environment.
Equipped with a special fan motor that provides maximum dust collection effect with low output.
Features
- Consideration has been given to the exhaust direction and noise reduction by installing a special cover.
- The power cable has a 2P/3P plug, so it can be used depending on the site.
- As standard accessories, filter x 1, cable (Φ1.25 x 5m) x 1, suction duct (Φ130 x 5m) x 1, and duct band x 1 will be shipped together.
Purpose
- Dust treatment generated during demolition, cutting, chiseling, drilling, grinding, scraping, spraying, etc.
・Dust treatment during powder transfer and collection.
- Dust treatment during air blowing of air conditioners, air conditioning ducts, filters, etc.
・Dust treatment during renovation interiors and demolition.
・Local ventilation, etc.
*It is not possible to collect dust from specific chemical substances such as asbestos and dioxins.
Specification
Dust Collector EJD1N
Suction diameter mm | 125 |
---|---|
Maximum air volume ㎥/min | 11.0 ※1 |
Maximum air volume ㎥/min | 12.5 ※2 |
Maximum static pressure KPa | 2.5 ※1 |
Maximum static pressure KPa | 3.5 ※2 |
Collection efficiency | 0.5μ×85% |
Installation location | indoor |
Rated voltage V | 100 |
Rated current A | 6.7 ※1 |
Rated current A | 9.9 ※2 |
Rated power consumption W | 620 ※1 |
Rated power consumption W | 990 ※2 |
Dimensions mm | Width 620×935 |
Unit mass kg | 48.2 |
*1 When using 50Hz
*2 When using 60Hz