Mighty Base

Handling Locations

*Click to go to Locations page

Mighty Base

Lightweight, safe and robust. A high-performance multi-functional workbench

A standard workbench that can be used at any work site. To ensure safety when used at the work site, the grab pole are equipped as a standard accessory.

Download Drawings

Features

When the legs are open, the rotating metal fittings and the fixed metal fittings are in complete contact. The wobble in the fittings, which is difficult to eliminate using only the ejector pin method, has been greatly reduced.
The double lock of the brace with a locking hinge and the slide lock greatly reduces lateral (gable side) shaking.
CSR150TF
With the end and support in close proximity to one another and reinforced with reinforcing material, the tread has a robust design.
By adjusting each leg in increments of 25mm, the platform will not be tilted to allow for stable work on uneven surfaces. There is a protective cover on the lock operating section. The cover seals the lock and keeps foreign things out of the operation section when it is closed.
The basic structure of the pillar is a square pipe structure, achieving a balance between light weight and rigidity.
Comes with a grab pole that is convenient and safe when going up and down. Can be stored on the main body side when carrying.
CSR130TF / CSR150TF

Specification

Mighty Base

Model	CSR70D	CSR100D	CSR130D	CSR130TF	CSR150TF
Top panel dimensions width (mm)	400	400	400	400	400
Top panel dimensions length (mm)	1,054	1,300	1300	1300	1488
Top panel height (mm)	500～644	646～959	925～1238	925～1238	1204～1493
Adjustable range (mm)	25	25	25	25	25
Step width (mm)	43	43	43	43	43
Mounting dimensions width (mm)	501~527	529～586	582～639	582～639	630～682
Mounting dimensions length (mm)	1,397～1,474	1,721~1,889	1,870～2,038	1,870～2,038	2,184～2,339
Storage dimensions width (mm)	501	529	582	582	630
Storage dimensions length (mm)	1,149	1,395	1,395	1,395	1,559
Storage dimensions height (mm)	122	122	160	160	160
Mass (kg)	9.4	11.5	13.2	15.4	20.1
Max load kN(kgf)	1.47(150)	1.47(150)	1.47(150)	1.47(150)	1.47(150)
Grab Pole	ー	ー	ー	4	4
	ー	ー	ー	ー	ー

*Please note that Iwaki Equipment Center only handles CSR70D

Download Drawings

Option

Girder side handrail CSRR131

Applicable models: CSR100D/130D
●Dimensions = length x height (mm): 1,464 x 1,255
●Mass (kg): 6.9

*Shaft supporter CSRS1 is required for installation.
Girder side handrail CSRR153

Applicable model: CSR150TF
-Dimensions = length x height (mm): 1,082 x 998
●Mass (kg): 3.5
Shaft supporter CSRS1

Applicable models: CSR100D/130D
●Dimensions = length (mm): 560
●Mass (kg): 0.4
Outrigger CSRG18

Applicable model: CSR150TF
●Mass (kg): 1.8