Hiryu
Handling Locations
*Click to go to Locations page
Hiryu
Expand and contract the top plate to suit your work.
One-piece design for quick assembly. It saves space when stored.
The top plate can be extended up to 1,800mm. It can be installed by dodging obstacles. Also, the shortest distance is 1,400mm, making it effective even in narrow spaces.
- Certification
- NETIS Registered Products
Target: Type 1 and Type 2 with safety guard
Features
-
The top plate expands and contracts in 4 steps from 1,400mm to 1,800mm at 100mm pitch. -
Gusset plates are used for the stair frame. Prevents horizontal shaking. -
The treadle is 60mm, the largest in the industry. -
Lighter weight due to increased use of stainless steel materials. It also has the effect of suppressing rattling. -
■Usage example ①
Work can be done without removing fixtures, etc. -
■Usage example ②
You can expand your work space using the horizontal board. -
■Usage example ③
Also suitable for working close to walls.
- The frame angle on the back side (cannot be lifted or lowered) is 80° (72.5° on the lifting side), allowing you to work close to the wall without leaning over.
- You can further expand your work space by combining it with a horizontal board.
Specification
Hiryu
| Model | CDE-14-4 (type 1) | CDE-18-4 (type 2) |
|---|---|---|
| Top panel dimensions width (mm) | 500 | 500 |
| Top panel dimensions length (mm) | 1400~1800 (100 pitch) | 1400~1800 (100 pitch) |
| Top panel height (mm) | 1,057～1,417 | 1,390～1,750 |
| Adjustable range (mm) | 72 (5 levels) | 72 (5 levels) |
| Step width (mm) | 60 | 60 |
| Mounting dimensions width (mm) | 795～883 | 881～973 |
| Mounting dimensions length (mm) | 2,055～2,634 | 2,219～2,798 |
| Storage dimensions width (mm) | 818 | 876 |
| Storage dimensions length (mm) | 1,750 | 1,750 |
| Storage dimensions height (mm) | 225 | 225 |
| Mass (kg) | 23.6 | 25.1 |
| Max load kN(kgf) | 1.47(150) | 1.47(150) |
| Grab Pole | 4 | 4 |
Option
-
Shoulder side guard
I will tell you the edge of the sleeve.
-
safety guard
I'll let you know the side edges.
-
Horizontal board
For expanding your work space.
●Dimensions = width x length (mm): 500 x 1,400 to 1,800 (100 pitch)
●Mass (kg): 11.4
Related Equipment
Renovation Scaffolding
During renovation work, it is possible to erect scaffolding while leaving the existing desks etc. in place.
Kons-arch
・When carrying out renovation work, it is possible to set up scaffolding with existing desks and other fixtures still in place.
- Unit structure reduces assembly and storage time
・Handrails, four-way sensors, and special ladders are standard equipment
