Gate Post for Truck
Handling Locations
*Click to go to Locations page
Gate Post for Truck
Fixed type main rope support to prevent falls during truck bed work
- Made of aluminum so it is light and easy to carry
Features
-
You can install it by simply hooking the upper hook onto the flap and fixing the lock plate with the adjustment nut. -
Overall diagram Part names
- The work can be done with just one spanner. Easy to install and remove
- Compact size suitable for storage and loading.
Specification
Gate Post for Truck TAPAY-15
| Body dimensions Width mm | 210 |
|---|---|
| Body dimensions length mm | 2,211 |
| Mountable tilt dimensions Height mm | 300~510 |
| Mountable tilt dimensions Thickness mm | ～60 |
| Mass (kg) | 8.6 |
| Maximum usable mass kg | 100 |
| Material | aluminum alloy |
*Do not drive the truck with the tilt support post attached.
*If there are any illuminations, etc., please be careful when installing the tilting post to avoid pinching the wiring.
Related Equipment
Truck Ladder with Safety Handrail
For safety measures when going up and down from the truck bed at the job site.
There are two types to choose from depending on the size of the truck.
Act Post for Truck
- For ensuring safety during loading and unloading work on the loading platform.
・The installation height of the main rope can be set in 3 levels.
Opening slide bar
- A tension rod that can be adjusted steplessly to fit the opening
・Installation is as simple as attaching it to a pre-buried scaffolding insert
・By placing scaffolding boards on the main body, it can also be used as a work floor.
